Worldwide shipping available
Expert product knowledge
Unbeatable customer support
>£< 0.00>£< 65.00
GFTK VDW 815 Plus Epoxy Paving Grout - 10KG - Basalto

GFTK VDW 815 Plus Epoxy Paving Grout - 10KG


>£< 65.00

  • 10k
  • Basalto
  • Natural
  • Stone





Estimated Delivery: 48 hours

If you want to be prompted via email as soon as this product becomes available please insert your email address here
Self compacting paving joint mortar for high performance in narrow joints > 3mm

fast and cost effective jointing
clean, stain free surfaces
water permeable
self compacting
easily flow applied
mechanical sweeper resistant
abrasion resistant
highly frost and de-icing salt resistant
minimises the risk of accidents
can be applied in the rain and at low temperatures
environmentally friendly

stable, load-bearing, permanently water permeable substrate, joint depth ≥ 30 mm (for areas with vehicle traffic: full joint depth), joint width continuously ≥ 3 mm, outside and surface temperature min. 3°C to max. 25 °C.

Test area:
On natural stone setts and concrete block paving, contact between the vdw 815 plus Epoxy Paving Mortar and the block surface may result in visual changes such as darkening and/or spotting. We generally recommend applying a test area first.

Test area:
On some reconstituted or sensitive natural stone paving, the vdw 815 binder contact can make the stone appear darker or to have a 'wet look'. Therefore always apply a test area first.

Clean the surface thoroughly of all dirt, cement residues, vegetation, organic material or other contaminants.

Fully saturate the surface of the paving. Always use fresh and cool tap water when wetting and cleaning.

Mixing the joint mortar:
Pre-mix the aggregate, then add the binder and mix with the drill and spherical paddle mixers for approx. 3 minutes until smooth and homogeneous. Do not mix partial quantities of the product. No water should be added to the mix.

Filling the joints:
Apply immediately after mixing by pouring directly onto the pre-wetted surface. Work the mortar thoroughly into the joints using a hard rubber squeegee, whilst spraying lightly with water from a hose. The surface should be kept constantly wet during application. We recommend working from the highest to the lowest points.

Brushing off/Cleaning:
Remove any excess mortar residue immediately from the area by spraying lightly with water from a hose. Be careful to clean the paved surface towards areas not yet jointed. Remove any final residual mortar with a damp coconut fibre brush. Do not brush this residual mortar into any unfilled joints. It is important to make sure that no water or residual mortar remains on the surface.

Anyway, please follow our detailed technical hints for the application of our products which are available free of charge. Subject to technical changes. When in doubt, please contact us. Our general conditions of sale apply.

Free Delivery

We offer free delivery on all orders over £600 nationwide. For full list of zones and prices, please go to Shipping prices and zones. Your order will normally be despatched within 24 hours on an economy service. It is possible to provide a next day, AM or timed delivery at a surcharge, but please speak to a member of our despatch team after placing your order.

Worldwide Shipping

Presently the only other country that we accept online orders from is the Republic of Ireland. We do offer worldwide shipping, so if you are intrested in this service, please contact our sales team for a quote.